P-T Series Hydrocarbon Trap/Purifier

The P-T series gas purification device includes a collection trap and a series of deoxygenation tube products. This series removes impurities such as water, oxygen, carbon dioxide, carbon monoxide, hydrocarbons, etc. from gases through the principle of selective adsorption. When the gas provided by the gas source cannot meet the gas quality requirements of gas equipment for LC-MS or GC, or when gas impurities have an impact on the experimental results, gas purification can be carried out through a Sciway gas purification device.

Application

It can be used for gas purification in LC-MS, GC, GC-MS, as well as gas purification in other detectors such as CAD, ECD, ELSD, etc. It can also be used for impurity removal and purification of other low flow reaction gases.

Technical Principles

Based on different gas characteristics and molecular categories, we utilize multi-layer materials including COFS as filling materials to create adsorption materials for trapping traps. The adsorption capacity and efficiency of different filling materials are matched one by one, which can remove water, hydrocarbons, carbon dioxide, and carbon monoxide from different gas sources.

Usage effect

This trap has an adsorption capacity of 100G gaseous and liquid hydrocarbon substances, which can effectively reduce C4 and other hydrocarbon substances, with a concentration of less than 15 μ G/L.

Product highlights

Innovative adsorption materials

Sciway uses COFs as one of the adsorption materials for hydrocarbons, with diverse adsorption modes, which can be applied to the separation and storage of gases such as hydrocarbons and CO2.

Higher adsorption and purification capacity

This product has an adsorption capacity of 100g of gaseous and liquid hydrocarbon substances, which can effectively reduce C4 and other hydrocarbon substances, with a concentration of less than 15 μ G/L.

Adapt to various types of gas equipment

Stainless steel sleeve joint, quick insertion joint, 1/8,1/4, φ 6 different connectors are available for easy access to various gas equipment, and laboratory personnel can independently and quickly complete the installation.

Free placement without restriction

Pressure filling design, avoiding the formation of gas channels, can be placed vertically or horizontally at will, with unrestricted installation conditions and stronger adaptability.